Brother DCP-7030 Service Manual page 16

■ Safety Precautions
Please keep these instructions for later reference and read them before attempting any
maintenance.
WARNING
There are high voltage electrodes inside the
machine. Before you clean the inside of the
machine, make sure you have unplugged the
telephone line cord first and then the power
cord from the AC power outlet
maintenance on page 115.)
DO NOT use flammable substances or any
type of spray to clean the inside or outside of
the machine. Doing this may cause a fire or
electrical shock. Refer to Routine maintenance
on page 115 for how to clean the machine.
DO NOT handle the plug with wet hands.
Doing this might cause an electrical shock.
Always make sure the plug is fully inserted.
After you have just used the machine, some
internal parts of the machine will be extremely
hot. When you open the front or back cover of
the machine, DO NOT touch the shaded parts
shown in the illustration.
The fuser unit is marked with a caution label.
Please DO NOT remove or damage the label.
(See Routine
xiv
Confidential