Brother DCP-7030 Service Manual page 167

(2) Remove the Taptite cup S M3x6 SR screw and the nine Taptite bind B M4x12 screws,
and then remove the Drive sub ASSY from the Main body.
Taptite bind B M4x12
Drive sub ASSY
Taptite cup S M3x6 SR
Taptite bind B M4x12
Taptite bind B M4x12
Taptite bind B M4x12
<Left side>
Fig. 3-93
CAUTION:
When removing the Drive sub ASSY, Ensure the left side of the Main body is at the top as
shown in the above figure because there is the risk of the gears falling off.
3-89
Confidential