Brother DCP-7030 Service Manual page 274

<WSW30>
Selector No.
1
Dial tone/busy tone detection
I level during recording of ICM
(Not used.)
3
4 Not used.
5 Drum cleaning alarm
6 Not used.
Scanning magnification
7
adjusting function (Not used.)
Density adjustment of the copy
8
for text mode
Note:
Selectors 1 through 3 are applicable to models equipped with internal TADs.
• Selectors 1 through 3:Dial tone/busy tone detection level during recording of ICM
If the machine (called station) detects dial tone (400 Hz continuously) or busy tone (400 Hz
intermittently) exceeding the detection level specified by these selectors for the period
specified by selectors 1 through 4 on WSW35, then it interprets the calling station as being
disconnected. The machine stops TAD recording and disconnects the line.
• Selector 8: Density adjustment of the copy for text mode
When copy the thin document, thicken the contrast and print it.
Function
(Not used.)
App. 1-35
Setting and Specifications
No. 1 2 3
0 0 0: -38.0 dBm
0 0 1: -39.5 dBm
0 1 0: -41.0 dBm
0 1 1: -42.5 dBm
1 0 0: -44.0 dBm
1 0 1: -45.5 dBm
1 1 0: -47.0 dBm
1 1 1: -48.5 dBm
0: ON 1: OFF
0: Enable 1: Disable
0: Normal 1: Thickening
(A)
(B)
(C)
(D)
(E)
(F)
(G)
(H)
Confidential