Brother DCP-7030 Service Manual page 273

<WSW29>
Selector No.
1 Compression threshold level for
voice signals inputted via the
I
telephone line in the built-in TAD
3 operation (Not used.)
4 Compression threshold level for
voice signals inputted via the
I
handset in the built-in TAD
6 operation (Not used.)
Impedance switching control in
7
pulse dialing (Not used.)
Prompt beep when the memory
8 area for the activity report
becomes full (Not used.)
Note:
• Selectors 1 through 6 are applicable to models equipped with built-in TADs.
• Selectors 7 and 8 are applicable only to the European versions.
• Selectors 1 through 6:Compression threshold level for voice signals inputted via the
If voice signals inputted via the telephone line are below the level specified by these
selectors, the TAD interprets those received voice signals as no signal, compressing the
recording time.
• Selector 8: Prompt beep for activity report (Not used.)
This selector determines whether or not to beep if the memory area for the activity report
becomes full, for prompting you to print out the report. (Printing it out will clear the memory
area.)
Function
telephone line and handset in the built-in TAD operation (Not
used.)
App. 1-34
Setting and Specifications
No. 1 2 3
0 0 0: -47.0 dBm
0 0 1: -48.5 dBm
0 1 0: -50.0 dBm
0 1 1: -51.5 dBm
1 0 0: -53.0 dBm
1 0 1: -54.5 dBm
1 1 0: -56.0 dBm
1 1 1: OFF
No. 4 5 6
0 0 0: -44.0 dBm
0 0 1: -45.5 dBm
0 1 0: -47.0 dBm
0 1 1: -48.5 dBm
1 0 0: -50.0 dBm
1 0 1: -51.5 dBm
1 1 0: -53.0 dBm
1 1 1: OFF
0: OFF 1: ON
0: No 1: Yes
(A)
(B)
(C)
(D)
(E)
(F)
(G)
(H)
(A)
(B)
(C)
(D)
(E)
(F)
(G)
(H)
Confidential