Brother DCP-7030 Service Manual page 217

Function
AUTO OFF
AUTO OFF TIME
FF SUPPRESS
AUTO LF
AUTO CR
AUTO WRAP
AUTO SKIP
LEFT MARGIN
RIGHT MARGIN
TOP MARGIN
BOTTOM MARGIN
LINES
ERROR PRINT
Set value
ON/OFF Configure the setting for the ON/OFF of the Auto
Form Feed. Effective for the print from the PC.
(Default : 0)
1 to 99 Configure the setting for the Time Out, when the
Auto Form Feed is ON.
(Default : 5)
ON/OFF Configure the setting for the skip of the blank page.
Effective for the print from the PC. The blank data in
the Copy/Fax cannot be turned ON/OFF in this
setting.
(Default : OFF)
ON/OFF Configure the setting for the auto line feed.
(Default : OFF)
ON/OFF Configure the setting for the auto Carriage Return.
(Default : OFF)
ON/OFF Configure the setting for the auto WRAP. (auto CRLF
at the print width)
(Default : OFF)
ON/OFF Configure the setting for the skip at the back-end/tip
of the recording paper) and add the blank space.
(Default : ON)
0 to 145 Configure the setting for the Left Margin. (column
space at the left end)
(Default : 0)
10 to 155 Configure the setting for the Right Margin. (column
space at the right end)
(Default : 80)
0/0.33/0.5/1.0/1.5/ Configure the setting for the space at the upper end.
2.0 (Default : 0.5)
0/0.33/0.5/1.0/1.5/ Configure the setting for the space at the bottom
2.0 end.
(Default : 0.5)
5 to 128 Configure the setting for the number of the lines in
the PCL.
(Default : 60)
ON/OFF Configure the setting for the Error Print of the BR-
Script 3.
(Default : ON)
5-21
Problem
Confidential