Hinge R / Hinge Arm / Hinge Assy L - Brother DCP-7030 Service Manual

8.11.2 HINGE R / HINGE ARM / HINGE ASSY L

(1) Remove the Hinge R from the Hinge arm.
(2) Remove the Taptite bind B M4x12 screw, and then remove the Hinge arm from the ADF
unit.
(3) Remove the two Taptite cup B M3x10 screws and the Taptite cup S M3x12 screw, and
then remove the Hinge ASSY L from the ADF unit.
Hinge arm
Hinge R
2
1
Taptite bind B M4x12
Hinge ASSY L
ADF unit
3
Taptite cup S M3x12
Taptite cup B M3x10
Fig. 3-29
3-35
Confidential