Appendix 1 Worker Switch Settings (Wsw) - Brother DCP-7030 Service Manual

APPENDIX 1 WORKER SWITCH Settings (WSW)

This appendix describes the functions of the Worker switches, which can be divided into two
groups: one is for customizing preferences designed for the shipping destination (Refer to
"1.4.16 EEPROM Customizing (Function code 74)" in Chapter
modifying preferences that match the machine to the environmental conditions. Use the latter
group if the machine malfunctions due to mismatching.
Each switch has eight selectors. However, some of them cannot be set by an end user. Only
selectors in the worker switch setting tables of this Appendix that are shaded can be set by
an end user.
The worker switch setting procedure is described in
Switch Setting (Function code
■ Worker Switch
WSW No.
WSW01
WSW02
WSW03
WSW04
WSW05
WSW06
WSW07
WSW08
WSW09
WSW10
WSW11
WSW12
WSW13
WSW14
WSW15
WSW16
WSW17
WSW18
WSW19
WSW20
WSW21
WSW22
WSW23
WSW24
WSW25
WSW26
WSW27
10).
Dial pulse setting
Tone signal setting
PABX mode setting
Transfer facility setting
1st dial tone and busy tone detection
Redial/Pause button setting and 2nd dial tone detection
Dial tone setting 1
Dial tone setting 2
Protocol definition 1
Protocol definition 2
Busy tone setting
Signal detection condition setting
Modem setting
AUTO ANS facility setting
Redial facility setting
Function setting 1
Function setting 2
Function setting 3
Transmission speed setting
Overseas communications mode setting
TAD setting 1
ECM and call waiting caller ID
Communications setting
TAD setting 2
TAD setting 3
Function setting 4
Function setting 5
App. 1-1
5) and the other is for
Chapter 5, Section 1.4.6 [ 1 ] Worker
Function Refer to:
App. 1-3
App. 1-5
App. 1-6
App. 1-8
App. 1-9
App. 1-10
App. 1-12
App. 1-13
App. 1-14
App. 1-15
App. 1-16
App. 1-17
App. 1-18
App. 1-19
App. 1-20
App. 1-21
App. 1-22
App. 1-23
App. 1-24
App. 1-25
App. 1-26
App. 1-27
App. 1-28
App. 1-29
App. 1-30
App. 1-31
App. 1-32
Confidential