Brother DCP-7030 Service Manual page 271

<WSW27>
Selector No.
1 Not used.
2 Ringer OFF setting
Automatic playback of OGM
3 when switched to the TAD mode
(Not used.)
Detection of distinctive ringing
4
pattern (Not used.)
5 Not used.
6 Recording quality (Not used.)
Recording time for high
7
recording quality (Not used.)
8 Not used.
Note:
Selectors 4 and 5 are applicable to the U.S.A. models only.
• Selector 2: Ringer OFF setting (Not used.)
This selector determines whether or not the ringer can be set to OFF.
• Selector 3: Automatic playback of OGM when switched to the TAD mode (Not used.)
This selector determines whether or not to automatically play back an OGM the moment
the machine switches to the TAD mode.
• Selectors 4: Detection of distinctive ringing pattern (Not used.)
If this selector is set to "1," the machine detects only the number of rings; if it is set to "0,"
the machine detects the number of rings and the ringing time length to compare the
detected ringing pattern with the registered distinctive one.
• Selector 6: Recording quality (Not used.)
This selector determines the recording quality for the OGM and ICM. Selecting "1" (High)
increases the quality, sacrificing the recording time.
• Selector 7: Recording time for high recording quality (Not used.)
This setting takes effect when selector 6 is set to "1" (High). Setting this selector to "0"
(Short) further increases the recording quality, sacrificing the recording time. The recording
quality and time to be applied when this selector is set to "1" (Long) are higher and shorter
than the ones to be applied when selector 6 is set to "0" (Normal).
The recording quality and time determined by this selector being set to "1" (Long) are
higher and shorter than the ones determined by selector 6 being set to "0" (Normal).
Function
App. 1-32
Setting and Specifications
0: Yes 1: No
0: No 1: Yes
0: Yes 1: No
0: Normal 1: High
0: Short (9.6 kbps) 1: Long (8.8 kbps)
Confidential