Henny Penny CSG Applications Manual page 40

Rethermalizing
CSL Unload
When done, open door slightly until fan stops and
CSM
heat dissipates. Open door fully to remove pans.
Unit automatically shuts off when door is opened.
CSB
CSG
Tips on Rethermalizing
• Reheat servings on plates, especially for large functions
• Special mobile oven rack
• Designed to hold plates for rethermalization
• Rolls in and out easily
• Thermal cover available to keep plates warm for short periods, or during transport
• Make sure food is arranged evenly on plates
• Sauces–pour over product before reheating, or on side after reheating
• Program rethermalization settings for similar, recurring situations*
• Use SDHC to "fine tune" rethermalization to achieve desired results*
*Available on CSL and CSM models, only
(continued)
X
Opening Door During Operation
Open door slightly to allow hot steam and/or
vapors to escape. KEEP FACE AND HANDS
AWAY FROM OPENING or burns could result.
When steam and/or heat has dissipated open
door fully with care. Escaping hot steam
and/or vapors can cause serious burns. Interior
surfaces extremely hot, including pans, grids
and oven racks. To prevent burns, allow unit to
cool, or use appropriate heat resistant protective
mitt or pad when handling.
39