Henny Penny CSG Applications Manual page 31

(continued)
• Use SDHC to achieve desired humidity, if necessary
Unload
When done, open door slightly until fan stops and
steam dissipates. Open door fully to remove pans.
Unit automatically shuts off when door is opened.
• Use SDHC to achieve desired humidity, if necessary
Unload
When done, open door slightly until fan stops and
steam dissipates. Open door fully to remove pans.
Unit automatically shuts off when door is opened.
Unload
When done, open door slightly until fan stops and
steam dissipates. Open door fully to remove pans.
Unit automatically shuts off when door is opened.
Unload
When done, open door slightly until fan stops and
steam dissipates. Open door fully to remove pans.
Unit automatically shuts off when door is opened.
X
Opening Door During Operation
Open door slightly to allow hot steam and/or
vapors to escape. KEEP FACE AND HANDS
AWAY FROM OPENING or burns could result.
When steam and/or heat has dissipated open
door fully with care. Escaping hot steam
and/or vapors can cause serious burns. Interior
surfaces extremely hot, including pans, grids
and oven racks. To prevent burns, allow unit to
cool, or use appropriate heat resistant protective
mitt or pad when handling.
In Combination Mode steam is not visible.
Cabinet looks dry, but is full of steam. KEEP
FACE AND HANDS AWAY FROM OPENING
or burns could result.
30