Appendix; Connecting To A Computer; Connecting The R-44 To Your Computer - Roland R-44 Owner's Manual

Appendix

Connecting to a Computer

You can move or copy projects recorded on the R-44 to your computer. Likewise, you can move or copy
files from your computer to the SD memory card.

Connecting the R-44 to Your Computer

Using battery power will not cause a malfunction, but we recommend that you always use the AC adaptor
to prevent damage to the contents of the SD memory card, which could occur if the batteries fail while the
R-44 is connected to your computer.
1
Turn on the [POWER] switch.
2
Use a USB cable to connect the R-44 to your computer.
The computer will detect the R-44, and the screen shown at right
is shown.
It may take several seconds for detection to occur.
* If you see the "Windows can perform the same action each time you insert a disk or connect a device
with this kind of file." dialog box, click [Cancel].
The computer will detect the R-44 as follows.
Windows Vista
Windows XP
Windows 2000
Mac OS X
* If you connect the R-44 to your computer when using an SD memory card that was not formatted by the R-44, the
name "R-44" will not be displayed.You must use an SD memory card that was formatted by the R-44.
3
You can copy WAV files from the R-44 to your computer, or from your computer to the R-44.
To copy a file, drag and drop it.
* Depending on the computer environment, you may not be able to play project files recorded in 24 bit or 4ch.
When viewed from My Computer or Explorer, the R-44 appears as R-44.
The R-44 appears as R-44 on the desktop.
71