Creating A New Folder (Make Folder) - Roland R-44 Owner's Manual

Creating a New Folder (Make Folder)

fig.finder-1.eps
1
Press the [ENTER/FINDER] button while the Main
screen is shown in the display. The Finder screen shown in
the illustration will appear.
Projects are shown in descending alphabetical order.
fig.finder-make1.eps
2
In the Finder screen, use the Cursor buttons [
or the [SCRUB/VALUE] dial to select
located at the top level.
Then press the [ENTER] button.
When a folder is selected, you can press the Cursor button [
folder (i.e., move to a lower-level folder).
If you want to move back to the upper-level folder, press the Cursor button [
fig.finder-make2.eps
3
When the screen shown in the figure is displayed, use the
Cursor buttons [
press the [ENTER] button.
fig.finder-make3.eps
fig.finder-make3.eps
4
When the screen shown in the figure is displayed, press
the [ENTER] button to confirm the operation.
fig.finder-make4.eps
fig.finder-make4.eps
Do not turn off the power while a folder is being created.
fig.new-folder.eps
ig.new-folder.eps
5
A folder named NewFolder is created.
Projects are shown in alphabetical order, and folders are shown in
alphabetical order after the projects.
Use the Cursor buttons [
dial to verify that the new folder was created.
If an identically named folder already exists, a number will be
added to the name of the newly created folder, e.g., NewFolder-1,
NewFolder-11, NewFolder-111, etc.
root folder (SD)
] [ ] to select
2 Make Folder
] [ ] or the [SCRUB/VALUE]
Manipulating a Project (Finder)
] [ ]
] to move into the selected
. Then
].
53