Playing Back; Connections Before Playback; Connecting Headphones; Connecting Amplified Speakers - Roland R-44 Owner's Manual

Playing Back

This section explains how to play audio recorded on the R-44 and projects on the R-44 SD memory Card.
Make the correct settings and connections before playing anything back.
• Connections Before Playback ............................. (p. 41)
• Setup Before Playback .......................................... (p. 43)
• Playing Back ............................................................ (p. 45)

Connections Before Playback

921
To prevent malfunction and/or damage to speakers or other devices, always turn down the volume, and
turn off the power on all devices before making any connections.

Connecting Headphones

Headphones provide a convenient way to monitor while recording or to check sound immediately after
recording.
1.
Turn the Monitor level knob all the way to the left to minimize the volume.
2.
Connect your headphones to the PHONES jack.
3.
Slowly turn the Monitor level knob toward the right to adjust the volume.

Connecting Amplified Speakers

The following describes how to connect amplified speakers that have line input jacks or a digital input jack.
1.
Turn off the power to the R-44.
2.
Minimize the volume of the speakers you want to connect, and then turn off the power.
3.
Depending on the type of speakers you are using, connect the amplified speakers to the [LINE
OUT] jacks or [DIGITAL OUT] jack.
4.
Turn on the R-44's power.
5.
Turn on your speakers, and gradually increase the volume to the desired level.

Connecting a Mixer or Other Analog Device

The following describes how to connect a mixer or other audio device that has line input jacks to the output
jacks of the R-44.
1.
Turn off the power to the R-44.
2.
Minimize the volume of the mixer or other device being connected.
3.
Connect the mixer to the [LINE OUT] jacks.
You will need separately available audio cables (not included) to connect to the [LINE OUT] jacks.
* Line output can be output as 4-indiv or monitor. Refer to "System Setting" in "5 System Setup" (p. 69) for
details.
4.
Turn on the R-44's power.
5.
Turn on your mixer, and gradually increase the volume to the desired level.
41