Roland R-44 Owner's Manual page 67

Menu item Value
MONOx1
MONOx2
MONOx3
MONOx4
STEREOx1
Rec Mode
STEREOx2
4CHx1
44.1 kHz
48 kHz
88.2 kHz
96 kHz
192 kHz
* Cannot be used if Input Select is set to IntMic or Digital.
Function
One-channel recording to
one monaural file
Two-channel recording to
two monaural files
Three-channel recording to
three monaural files
Four-channel recording to
four monaural files
Two-channel recording to
one stereo file
Four-channel recording to
two stereo files
Four-channel recording to
one four-channel file
MONOx1 MONOx2 MONOx3 MONOx4 STEREOx1 STEREOx2 4CHx1
This selects the structure of the project file that is
created during recording. A monaural WAV file
will be created for each channel. Choose these
settings if you are using a separate microphone
for the vocal and performance or for each speaker
in a conversation, so that a separate file is created
for each channel. These settings create monaural
WAV files. If Input Select is set to Analog, you
can create up to four monaural files. If Input
Select is set to IntMic or Digital, you can create up
to two monaural files.
* You cannot select MONO x3 or MONO x4 if
Input Select is set to IntMic or Digital.
* You cannot select MONO x3 or MONO x4 if
Rec Freq. is set to 88.2 kHz, 96 kHz, or 192 kHz.
Two channels are recorded as L and R to create a
stereo WAV file.
If Input Select is set to Analog, one stereo WAV
file with channel 1 as L and channel 2 as R is
created. The inputs to channels 3 and 4 are
ignored.
If Input Select is set to IntMic or Digital, one
stereo WAV file is created.
If Input Select is set to Analog, a stereo file with
channel 1 as L and channel 2 as R is created, and
another stereo file with channel 3 as L and
channel 4 as R is also created.
* When Input Select is set to either IntMic or
Digital or when Rec Freq. is set to 192 kHz,
STEREOx2 cannot be selected.
Channels 1–4 will be recorded as a single WAV
file. Be aware that not all computer software can
handle four-channel WAV files.
* When Input Select is set to either IntMic or
Digital or when Rec Freq. is set to 192 kHz,
4CHx1 cannot be selected.
System Setup
67