Roland R-44 Owner's Manual page 57

fig.effect-play2+.eps
5
In the same way, set the "PLAY" and "REC" fields.
PLAY
OFF The effect is not applied during playback
ON The effect is applied during playback
fig.effect-rec+.eps
REC
OFF The effect is not applied during recording
ON The effect is applied during recording
fig.effect-para+.eps
6
Press the [DISP] button.
The effect parameter screen is shown on the display.
* The effect parameter screen does not appear when 0: No Effect is
selected as the type.
7
Use the Cursor buttons [
[SCRUB/VALUE] dial to set each effect parameter.
fig.effect-para2+.eps
8
If you selected
"CH1 CH2 CH3 CH4"
the "Link" field, press the [DISP] button.
The next channel (or pair of channels) will appear in the display.
While selecting effects or setting effect parameters, you can return to the previous screen by
pressing the [EXIT] button. The effect settings you make are stored until you change them.
However, if you change the effect type (Type), the settings you made are reset to the default
values.
9
When finished setting the effect parameters, press the [EXIT] button to return to the Main screen.
Each effect has various parameters that you can adjust to alter the character of the effect. The settings you
make are stored even when the R-44's power is switched off. However, if you change the effect type, these
settings are reset to the default values.
] [ ] [ ] [ ] and the
or
"CH1+2 CH3+4"
Setting the Color of Sound (Effects Settings)
in
57