Speaker Settings - Roland R-44 Owner's Manual

Playing Back

Speaker Settings

You can use the R-44's Internal speakers to monitor the sound without having to connect headphones or
other equipment.
fig.recording-1.eps
1
Press the [MENU] button.
The System Menu screen appears on the display.
fig.speaker-on.eps
2
Use the Cursor buttons [
and press the [ENTER] button.
The Speaker screen appears.
Speaker Switch setting
ON
OFF
* Note that sound will not be output from the internal speakers if headphones are connected. If you want to use the
internal speakers, you must disconnect the headphones.
* You cannot monitor with the internal speakers while recording. You will need to monitor through headphones.
* For more about system settings, refer to "System Setup" (p. 60).
44
] [ ] to choose
Output destination
Internal speakers
Line output jacks
Digital output jack
Headphones
Line output jacks
Digital output jack
Headphones
* The value in boldface is the default value.
,
3 Speaker