Simultaneously Recording Sound From Connected Microphones And An Analog Device - Roland R-44 Owner's Manual

Simultaneously Recording Sound from Connected
Microphones and an Analog Device
The following describes how to record sound from microphones connected to the R-44's Combo input jacks
3 and 4 and an analog device connected to Combo input jacks 1 and 2.
fig.input-analog.eps
● Connections
Connect your microphones to Combo input jacks 3 and 4. Connect your analog device to the Combo
input jacks 1 and 2.
You will need a separately available coaxial cable to connect your device to the R-44's Combo input
jacks.
● Phantom power switch
Turn this ON when connecting a phantom-powered condenser
microphones.
● System settings
1.
Press the [MENU] button.
2.
In 1 Recording Setup, set Input Select to Analog.
3.
Set the Rec Mode to STEREOx2.
Set the other items in 1 Recording Setup as appropriate for the recording you
want to make.
4.
When finished with the settings, press the [EXIT] button to return to the Main
screen.
* For more about system settings, refer to "System Setup" (p. 60).
* If Rec Freq is set to 192 kHz after setting Rec Mode to STEREOx2, Input Select is automatically changed
to Digital and Rec Mode is changed to STEREOx1.
● Limiter
Turn this ON if you want to prevent unexpectedly loud sounds or strong attacks from producing clipping noise.
The limiter threshold is -10 dB relative to digital full scale.
The limiter can group and link each channel. Refer to "Limiter link" (p. 68).
● Low cut
You can turn low cut on when breathing noise (the sound of breathing while recording a voice) or wind
noise (when recording outside) may be a problem.
The low cut feature records while cutting the lower range of the input signal.
Microphones
CD player for playback
Recording
39