Display - Roland R-44 Owner's Manual

Introducing the R-44

Display

While Playing or Stopped
The Main screen
The R-44's Main screen displays information about the project and the operational status of the R-44.
You can press the [DISP] button to change the contents of the display.
fig.play-disp.eps
Time counter
Level scale
dBFS
Channel
names
Output
assignments
Project name
Time counter
Progress bar
Total time (LEN: Length)
Level scale dBFS
Clip level indicators
Channel level meters
Channel names
Output assignments
Sampling frequency
Sample size (bit depth)
18
Project name
Channel level
meters
Status indication Clip level indicators
Displays the name of the project. The file name is shown when you copy WAV
files from your computer via USB to the R-44's SD memory card. File names
containing double-byte characters (e.g., Japanese) are not displayed correctly,
but such files can be played.
Displays the time elapsed from the beginning of the project to the current
position in hour:minute:second:1/100 second format.
Displays the current playback location relative to the entire project.
Displays the total time of the entire project.
Displays the sound level for each channel (after adjusting input levels) in real
time.
The markings are relative to 0 dBFS (Full Scale) of the digital signal. For
example, 12 indicates -12 dBFS. C is the clipping level (0 dBFS).
Displays up to four channel names. When using one stereo channel, 1L and
1R are shown. When using two stereo channels, 1L, 1R, 2L, and 2R are shown.
For monaural projects, 1, 2, 3, and/or 4 is shown according to the number of
channels.
When the sensitivity setting is too high and clipping occurs the display is
shown in inverted black and white.
Displays how the audio of each channel is assigned to the L/R output
channels.
right channel, and
shown are not output.
You can select a channel to be monitored by pressing the Monitor Level
knob. You can also restore the default settings by pressing and holding down
the Monitor Level knob for one second.
The output is sent to the PHONES jack, Line output jacks, and digital output
jack.
* When Output Sel (p. 69) in the system settings is set to "monitor," the Line
output jacks output sound as set in the output assignments.
Displays the sampling frequency and sample size (bit depth) of the currently
selected project.
Progress bar Total time
Date and time
Monitor level meters
means that the audio is output to the left channel,
to both left and right channels. Channels that are not
Sampling frequency
Sample size (bit depth)
Marker indicators
Clip level indicators
Power source
to the