Markers - Roland R-44 Owner's Manual

Playing Back

Markers

You can assign markers at desired locations in a project. Then you can use the Maker [
Maker [ ] button to move backward or forward to a marker location.
* You can use the Mark function only while playing (while the Main screen is displayed) or while recording.
1
Use the [NEXT] button, [PREV] button or the [SCRUB/VALUE] dial to find the location
where you want to assign a marker.
Play, fast-forward (press and hold the [NEXT] button), or rewind (press and hold the [PREV] button) the
project to the location where you want to assign a marker.
fig.mark-1.eps
2
Press the [MARK] button at the location where
you want to assign a marker.
The display indicates the number of markers, as shown
in the figure at right. Markers are numbered sequentially
starting from the beginning of the project.
You can assign up to 99 markers.
Repeat steps 1 and 2 to assign markers as desired.
* When the song ends, the number of passed markers becomes E.
3
After assigning one or more markers, proceed as follows.
You can use these operations either while playing or while stopped.
Maker [ ] button
Moves to the marker immediately before the current location (previous marker).
Maker [ ] button
Moves to the marker immediately following the current location (next marker).
[CLEAR] button
Deletes the markers that you set with the [MARK] button. Markers are deleted consecutively, starting
with the marker immediately before the current location.
46
] button or
Number of markers
in the project
Marker information
Number of markers
you've passed