Deleting A Project (Delete) - Roland R-44 Owner's Manual

Manipulating a Project (Finder)

Deleting a Project (Delete)

fig.finder-1.eps
1
Press the [ENTER/FINDER] button while the Main
screen is shown in the display. The Finder screen shown in
the figure is displayed.
Projects are shown in descending alphabetical order.
fig.finder-select.eps
2
In the Finder screen, use the Cursor buttons [
or the [SCRUB/VALUE] dial to select the project you
want to delete. Then press the [ENTER] button.
When a folder is selected, you can press the Cursor button [
folder (i.e., move to a lower-level folder).
If you want to move back to the upper-level folder, press the Cursor button [
fig.finder-delete1.eps
3
When the screen shown in the figure is displayed, use the
Cursor buttons [
the [ENTER] button.
fig.finder-delete2.eps
4
The screen shown in the figure is displayed. Press the
[ENTER] button to execute the Delete operation.
* If you decide to cancel without executing, press the [EXIT] button
before you press the [ENTER] button.
fig.finder-delete3.eps
Do not turn off the power while a project is being deleted.
52
] [ ] to select
5 Delete
] [ ]
] to move into the selected
. Then press
].