Executing Factory Reset (Restoring Factory Default Settings) - Roland R-44 Owner's Manual

Executing Factory Reset (Restoring Factory Default Settings)

fig.pj-name1.efig.pj-name1.eps
fig.F
1
Press the [MENU] button.
The System Menu screen is shown on the display.
act-uti1.eps
2
Use the Cursor buttons [
, and press the [ENTER] button.
Reset
The Factory Reset screen is shown.
fig.fact-reset.eps
3
Press the [ENTER] button to perform Factory Reset.
* If you decide to cancel, press the [EXIT] button.
fig.fact-reset.eps
4
The "Are you sure?" confirmation message appears. Use
the Cursor buttons [
sure you want to execute or "No" if you decide to cancel
without executing.
Then press the [ENTER] button.
When processing has completed, you are automatically returned to the System Menu screen.
fig.hd-uti4.eps
The message shown at right is shown during processing.
Do not turn off the power during processing.
5
Press the [EXIT] button again to return to the main screen.
If you want to make other system related settings, use the Cursor buttons [
menu item.
] [ ] to select
9 Factory
] [ ] to select "Yes" if you are
System Setup
] [ ] to select the desired
65