Disconnecting The R-44 From A Computer - Roland R-44 Owner's Manual

Appendix

Disconnecting the R-44 from a Computer

The following describes how to close the connection between your computer and the R-44. You must use
the procedure described below to close the connection before you disconnect the USB cable.
Do not disconnect the USB cable or power down the R-44 while it is connected to your computer.
Windows Vista, Windows XP or Window 2000
1
Close all software and windows (such as Explorer) that are referencing the SD memory card.
* If any software or windows (such as Explorer) referencing the SD memory card are open when you close the USB
connection between your computer and the R-44, an error will occur and the connection will not be closed correctly.
2
In the Windows task tray, double-click the
The Safely Remove Hardware dialog box will appear.
3
Select the item (EDIROL R-44 USB Device) that indicates the R-44.
4
In the dialog box, click
5
When the
Stop a Hardware Device
and click
[OK]
6
When your computer indicates
you can disconnect the USB cable between
Hardware,"
the R-44 and your computer.
When you disconnect the cable, the screen shown at right will
appear.
* Never switch off the R-44's power or disconnect the USB cable before
you have closed the connection. Doing so may damage the SD
memory card.
Macintosh OS X
1
Cancel the connection with the R-44 displayed on the desktop.
Drag the R-44 icon to the
Normally, when you drag to the trash can located at the right edge of the dock, the indication changes from
the trash can to
2
When the icon has disappeared from the desktop, you can disconnect the
USB cable between the R-44 and your computer.
72
.
[Stop]
dialog box appears, select the item that indicates the R-44,
.
"Safe To Remove
icon on the dock.
allowing you to cancel the connection.
Safely Remove Hardware icon
.