Recording Sound On Your Computer - Roland Edirol PCR-1 Owner's Manual

Recording sound on your computer

application to record sound from external audio device)
fig.PCrec
Setting
• Use the Input volume (p. 12) to adjust the input level.Check the input level on the application
that you using.
• You must set the PCR-1's sample rate to match the sampling frequency used by your
application.(➝ USB AUDIO MODE SETTING (p. 96))
In order for the sampling frequency setting to take effect, you exit applications and disconnect
the USB cable from the PCR-1, then connect it again.
• If Direct Monitor (p. 97) is ON, the signal input through the audio input jacks will be output
from the headphone jack and the master output jacks. is ON, use the Master volume knob (p.
9) to adjust the monitor level.
* Adjusting the monitor level will not change the recording level.
USB Cable
Connect to INPUT L-R
Signal flow
Audio Cable
(using your
Adjust the
input level.
OUTPUT
Audio amp
Record Player
(cassette deck)
Use audio functionality
MIDI
Sound
Module
47