Setting Whether To Monitor Sound While Recording - Roland R-09HR Owner's Manual

R-09HR configuration settings

Setting whether to monitor sound while recording

(Rec Monitor Sw)
Sets whether to monitor the input sound through headphones while recording.
fig.inputsetting-e.eps_80
1.
Select "Input Setup" from the <Menu
Screen>.
Use the [PLAY Button
"Input Setup," then press the [REC Button].
fig.setrecmonitor-e.eps_80
2.
Set monitoring with the "Rec Monitor Sw."
Use the [PREV button
whether to monitor the input sound through the
headphones during recording by changing the setting for
Rec Monitor Sw.
Setting
When finished with the settings, press the [MENU button] to return
to previous screens, in order.
If you monitor the sound through headphones while recording,
there will be a 6 ms delay compared to the actual sound, but this
is not a malfunction.
104
] and [STOP Button
] and [NEXT button
OFF (no monitoring)
ON (monitoring)
] to select
Move the
cursor
up or down
] to set
Change
the value
Enter