To Save A Copy Of The Routers Configuration; To Restore A Copy Of The Routers Configuration; To Restore The Routers Configuration To The Factory Defaults - NetComm NTC-6000 SERIES User Manual

10.2 To save a copy of the routers configuration

This facility is available by clicking on the "System" menu followed by "Load / Save" and then the "Settings" menu item on the right..
To perform functions like Firmware Upgrade, Device Configuration Backup and to Restore and Reset router to factory defaults, you need to
login in the root manager mode.
To login to the router in root manager mode, please use the following login details:
http://192�168�20�1
Username:
Password:
Key in the root manager Password and click Save
This will download a copy of the current settings from the router to your PC.
NOTE:
• It is NOT possible to edit the contents of the file downloaded; if you modify the contents of the configuration file in any way you will not be able to restore it later.
• You may change the name of the file if you wish but the filename extension must remain ".cfg"

10.3 To restore a copy of the routers configuration

This facility is available by clicking on the "System" menu followed by "Load / Save" and then the "Settings" menu item on the right..
Click Browse
Select the configuration file you wish to restore
Click Restore

10.4 To restore the routers configuration to the factory defaults

This facility is available by clicking on the "System" menu followed by "Load / Save" and then the "Settings" menu item on the right..
Click Restore to restore the factory default configuration.
YML6000
www.netcomm.com.au
NetComm CallDirect™ Series - NTC-6000 Series
root
admin
NTC-6000 User Guide
49