Sms Tools Setup - NetComm NTC-6000 SERIES User Manual

Wireless M2M
9.1

SMS Tools Setup

General SMS functionality is enabled by default. You can open the Setup page in order to configure additional settings. To do this, click on
"Services", then "SMS" and then "Setup".
NTC-6000 Series User Guide
40
Item Description
Number of Messages/Page: Enter the number of SMS messages to display per page.
Redirect to Mobile: Forward incoming text messages to the remote destination defined.
Redirect to TCP: Forward incoming text messages to the remote TCP destination defined.
TCP Port to redirect: The TCP port on which to connect to the remote destination on.
Redirect to UDP: Forward incoming text messages to the remote UDP destination defined.
UDP Port to redirect: The UDP port on which to connect to the remote destination on.
Enable Remote Diagnostics: Enable diagnostics to be performed by a specially crafted SMS message.
YML6000
www.netcomm.com.au