Preparing Your Computer - NetComm NTC-6000 SERIES User Manual

Wireless M2M
2.3

Preparing your computer

Connect one end of the supplied Ethernet cable to the Ethernet port of your router. Connect the other end of the cable to the LAN
port of your computer. Configure your PC's Ethernet interface to use a dynamically assigned IP address by doing the following.
2.3.1 Ethernet interface configuration in Windows XP
Click on the Start button, then the Control Panel and then Network Connections.
Right click on Local Area Connection and select Properties to open the configuration dialogue box of the Local Area Connection as below:
Find and click Internet Protocol (TCP/IP) from the protocol list box and then click the Properties button. The TCP/IP configuration window
will pop up as illustrated below.
Under General tab, select radio button 'Obtain an IP address automatically' and 'Obtain DNS server address automatically'.
Then press the OK button to close TCP/IP configuration window and then press the Close button to complete the computer preparation for
the router.
NTC-6000 Series User Guide
10
YML6000
www.netcomm.com.au