Rs-232 Serial Port Integration Parameters; Custom Application And Scripting - NetComm NTC-6000 SERIES User Manual

12.3 RS-232 serial port integration parameters

You can use the table below to design serial cables to integrate the router into your system.
Standard RS-232 DE-9 Pinout:
Note:
—» Output from router
«— Input to router
Shown below are the communications parameters of the RS-232 port:

12.4 Custom Application and Scripting

The NTC series router covered in this manual offers the ability for the user to install custom application / firmware images via the application
programming interface.
For further information, please contact the NetComm 3G Mobile Broadband Solution support team.
YML6000
www.netcomm.com.au
Pin Name Direction
1 CD —»
2 RX —»
3 TX «—
4 DTR «—
5 GND
6 DSR —»
7 RTS «—
8 CTS —»
9 RI —»
Default RS-232 Communication Parameters:
Bits Per Second: 115,200
Data Bits: 8
Parity: None
Stop Bits: 1
Flow Control: Hardware
Phone: (02) 9424 2053
Fax: 1800 063 962
Email: service@call-direct com.au
Web www.netcom-commercial.com.au
NetComm CallDirect™ Series - NTC-6000 Series
Description
Carrier Detect
Receive Data
Transmit Data
Data Terminal Ready
System Ground
Data Set Ready
Request to Send
Clear to Send
Ring Indicator
NTC-6000 User Guide
59