Table of Contents
Advertisement
8.4.2
Passwords
The Passwords option configures your Web UI account access password for your Router. Access to the device is limited to the following three
user accounts:
•
admin is to be used for local unrestricted access control
•
support is to be used for remote maintenance of the device
•
user is to be used to view information and update device firmware
Use the fields illustrated in the screen below to change or create your password. Passwords must be 16 characters or less with no spaces. Click
Apply/Save to continue.
8.5 Save/Reboot
This function saves the current configuration settings and reboots your Router.
NOTE 1:
It may be necessary to reconfigure your TCP/IP settings to adjust for the new configuration. For example, if you disable the Dynamic Host Configuration Protocol (DHCP)
server you will need to apply Static IP settings.
NOTE 2:
If you lose all access to your web user interface, simply press the reset button on the rear panel for 5-7 seconds to restore default settings.
HSPA+ 42Mbps WiFi Router User Guide
30
YML42
www.netcomm.com.au
Advertisement
Table of Contents
