How To Configure Your Device's Ip Address Manually (No Dhcp) - NetComm NTC-6000 SERIES User Manual

Wireless M2M
5.3.1 How to configure static DHCP assignments
This facility is available by clicking on the "Internet Settings" menu followed by "LAN" and then the "DHCP" menu item on the right.
You may assign a particular IP address to a specific device every time that device makes a DHCP request as follows:
a. Click Add
b. Enter a name for the computer or device
c. Enter the computer or devices' MAC address
d. Enter the IP address to assign
e. Click Save
5.4

How to configure your device's IP address manually (no DHCP)

If your device has a static IP address set, you can configure your device to work with the router by manually configuring your device to the
following settings:
Set your device's IP address to any valid IP between 192.168.20.2 and 192.168.20.99 or disable the DHCP server and use any address.
Do not use the IP address assigned to the router's Ethernet interface.
Set your device's subnet to: 255.255.255.0.
Set your Gateway to the IP address of the router's Ethernet interfacer: 192.168.20.1
DNS (if required) set to 192.168.20.1 or manually set to your carrier's DNS Servers.
NTC-6000 Series User Guide
26
YML6000
www.netcomm.com.au