Inbox/Outbox; Diagnostics And Command Execution Setup - NetComm NTC-6000 SERIES User Manual

Wireless M2M

9.5 Inbox/Outbox

You can check all sent SMS messages in the SMS Outbox or you can read, delete, reply or forward an SMS message to another mobile
device from the SMS Inbox.
You are also able to add the SMS message sender to the "White List" which is used to secure the Remote Diagnostics feature. Simply
select the sender or recipient number and click the "Add White List" button.
9.6

Diagnostics and Command Execution Setup

Enable Authentication
Enable or disable checking the sender's phone number against the allowed sender "White List" for incoming Diagnostics/Command
Execution SMS messages.
If authentication is enabled, the router will check if the sender's number exists in the "White List". If it exists, the router then checks the
password in the incoming message against the password in the "White List" for the corresponding sending number. If they match, the
Diagnostics/Command is executed.
If the number does not exist in "White List" or the password does not match, the router does not execute the incoming Diagnostics/
Command Execution SMS message.
This is enabled by default.
It is highly recommended to enable security when utilising the Diagnostics/Command Execution feature.
NTC-6000 Series User Guide
42
YML6000
www.netcomm.com.au