How To Configure A Periodic Reset Timer; How To Configure The Modem - NetComm NTC-6000 SERIES User Manual

Wireless M2M
8.5

How to configure a Periodic Reset Timer

This facility is available by clicking on the "Services" menu followed by the "System Monitor" menu item on the right.
The router can be configured to automatically reboot after a periodic interval specified in minutes. While this is not necessary, it does ensure
that in the case of remote installations, it will reboot the router if some anomaly occurs.
The default value is 0 which disables the Periodic Reset Timer. The maximum value is 65535 minutes.
8.6

How to configure the modem

This facility is available by clicking on the "Services" menu followed by the "Modem" menu item on the right.
The modem can be utilised to communicate with serial devices via the DE-9 connector on the router. This enables the router to
communicate with remote monitoring systems, as well as a variety of embedded systems utilising serial port connections.
The modem settings can be adjusted if required to match your serial device settings.
NTC-6000 Series User Guide
36
YML6000
www.netcomm.com.au