To Save A Copy Of The Routers Configuration; To Restore A Copy Of The Routers Configuration; To Restore The Router's Configuration To The Factory Defaults; To Upgrade To A New Router Application Version - NetComm NTC-5000 Series User Manual

Industrial hspa ethernet router

Table of Contents

8.2 To save a copy of the routers configuration

To get access to this facility, firstly login to the router in root manager mode. Please use the following login details: The status page of the

router will then display.

http://192�168�1�1

Username:

Password:

NOTE: To perform functions like Firmware Upgrade, Device Configuration Backup and to Restore and Reset router to factory defaults, you need to login in the root manager mode.

Click on the "System" menu followed by "Load / Save" and then the "Settings" menu item on the right..

Key in the root manager Password and click Save

This will download a copy of the current settings from the router to your PC.

NOTE:

• It is NOT possible to edit the contents of the file downloaded; if you modify the contents of the configuration file in any way you will not be able to restore it later.

• You may change the name of the file if you wish but the filename extension must remain ".cfg"