Projector Installation Settings - Installation Menu - Epson EB-810E User Manual

Projector Installation Settings - Installation Menu

Settings on the Installation menu help you set up your projector in your
installation environment.
Setting Options
Fixed Installation On
Off
Test Pattern —
Setting Plate —
Installation Guide
Description
Set to On if you installed the projector in
a fixed location.
Displays a test pattern to assist in
focusing and zooming the image and
correcting image shape (press the [Esc]
button to cancel pattern display).
Displays a guide screen when installing
the projector.
Setting Options
Projection Front
Rear
Front/Upside
Down
Rear/Upside Down
Geometry Quick Corner
Correction
Arc Correction
Point Correction
Correct Distortion
Using Smartphone
Fit to Screen Using
Smartphone
Memory
Description
Sets the way the projector faces the screen
so the image is oriented correctly.
Corrects image shape and alignment
using an on-screen display.
Corrects the corners and sides of an
image projected on a curved surface.
Divides the projected image into a grid
and corrects the distortion by moving the
selected point of intersection from side to
side and up and down.
Corrects the distortion of projected
images using the Epson Setting Assistant
app.
Corrects the shape and position of images
to fit on your screen using the Epson
Setting Assistant app.
Save customized sets of settings to
memory.
• Save Memory: saves the current shape
of an image you have adjusted.
• Load Memory: loads the settings you
made and saved.
• Rename Memory: changes the name
of the memory settings.
• Erase Memory: deletes a saved
memory.
• Reset Memory: Resets all saved
memories.
195