Playback; Basic Playback Procedure; Selecting An Hdmi Output Jack - Yamaha RX-A3020 Owner's Manual

PLAYBACK

SOURCE SOURCE RECEIVER RECEIVER

Basic playback procedure

AV
1 2 3 4
5 6 7 V-AUX
AUDIO
1
Input selection keys
1 2 3 4
PHONO MULTI USB NET
TUNER [ A ] [ A ] [ B ] [ B ] [ C ] [ C ]
SCENE
2
1 2 3 4
VOLUME VOLUME
PROGRAM MUTE
3
MUTE
TOP MENU POP-UP/MENU
ON SCREEN ON SCREEN
ON SCREEN OPTION
Cursor keys
ENTER
ENTER
RETURN DISPLAY
SUR. HDMI OUT HDMI OUT
MODE ENHANCER PARTY HDMI OUT
DECODE
INFO MEMORY FM AM
LIVE
1 2 3
CLASSICAL ENTERTAIN
CLUB
TUN./ CH TUN./ CH
PRESET
4 MOVIE 5 STEREO 6 STRAIGHT
TV
PURE
INPUT 7 8 9 SLEEP
DIRECT
TV VOL TV CH
MUTE 10 0 ENT LEVEL
ZONE SETUP
4
a Press ON SCREEN.
b Use the cursor keys to select "Input" and press ENTER.
c Use the cursor keys to select the desired input source and
Turn on the external devices (such as a TV or
BD/DVD player) connected to the unit.
Use the input selection keys to select an input
source.
Start playback on the external device or select a
radio station.
Refer to the instruction manual for the external device.
For details on the following operations, see the
corresponding pages.
• Listening to FM/AM radio (p.69)
• Playing back iPod music (p.76)
• Playing back music stored on a USB storage device
(p.80)
• Playing back music stored on media servers (PCs/NAS)
(p.83)
• Listening to Internet radio (p.86)
• Playing back iTunes/iPod music via a network (AirPlay)
(p.88)
Press VOLUME to adjust the volume.
• To mute the audio output, press MUTE. Press MUTE again to unmute.
• To adjust the treble/bass settings, use the "Option" menu or
TONE/BALANCE on the front panel (p.99).
On-screen input selection
press ENTER.

Selecting an HDMI output jack

1
Press HDMI OUT to select an HDMI OUT jack.
Each time you press the key, the HDMI OUT jack to be
used for signal output changes.
HDMI OUT Sel.
DOCK
TAG
HD
STEREO TUNED PRE AMP PARTY
ZONE ZONE ZONE
OUT 1+2
2 3 4
IN OUT 1 OUT 2
ENHANCER SLEEP
HD 3
Outputs the same signal at both the HDMI OUT 1
OUT 1+2
and HDMI OUT 2 jacks.
OUT 1
Output the signals at the selected HDMI OUT jack.
OUT 2
Off Does not output the signals at the HDMI OUT jacks.
• You can also select an HDMI output jack by selecting a scene (p.61).
• When "OUT 1+2" is selected, the unit outputs video signals at the highest
resolution supported by both TVs (or projectors) connected to the unit. (For
example, if you have connected a 1080p TV to the HDMI OUT 1 jack and a 720p
TV to the HDMI OUT 2 jack, the unit outputs 720p video signals.)
• (RX-A3020 only)
If the HDMI OUT 2 jack is assigned to Zone2 or Zone4 (p.127), you can turn on/off
each zone by pressing HDMI OUT repeatedly.
PLAYBACK ➤ Basic playback procedure
MUTE VOLUME
ADAPTIVE DRC
PL L C R PR
SL SW1 SW SW2 SR
PL SBL SB SBR PR
60
En