Multi Zone; Main Zone Set - Yamaha RX-A3020 Owner's Manual

Multi Zone

Configures the multi zone settings.
■

Main Zone Set

Configures the main zone setting.
❑ Zone Rename
Changes the zone name (for main zone) displayed on the front display or TV screen.
■
Procedure
1
Press ENTER to enter the name edit screen.
2
Use the cursor keys and ENTER to rename and select "ENTER" to confirm the entry.
• To clear the entry, select "CLEAR".
3
Use the cursor keys to select "OK" and press ENTER.
• To restore the default setting, select "RESET".
4
To exit from the menu, press ON SCREEN.
■
Zone2 Set, Zone3 Set
Configures the Zone2 or Zone3 settings.
❑ Volume
Enables/disables volume adjustments for Zone2 or Zone3 output.
If you have connected an external amplifier with volume control to the unit, disable the
volume adjustment for the corresponding zone.
Settings
Fixed Disables volume adjustments for Zone2 or Zone3 output.
Variable (default) Enables volume adjustments for Zone2 or Zone3 output.
• This setting is not available depending on the "Power Amp Assign" setting (p.114).
❑ Max Volume
Sets the Zone2 or Zone3 maximum volume to prevent excessive loudness.
Setting range
-30.0 dB to +15.0 dB (5.0 dB increments), +16.5 dB
Default
+16.5 dB
• This setting is available only when "Volume" is set to "Variable".
❑ Initial Volume
Sets the Zone2 or Zone3 initial volume for when the unit is turned on.
Settings
Sets the level at the volume level of the unit when it last entered standby
Off (default)
mode.
Sets at Mute or the specified volume level (-80.0 dB to +16.5 dB, 0.5 dB
On increments).
(Specify a volume level which is lower than the "Max Volume" setting.)
• This setting is available only when "Volume" is set to "Variable".
CONFIGURATIONS ➤ Configuring various functions (Setup menu)
125
En