Playback Basic Operations; Selecting The Output Speakers - Yamaha MusicCast R-N2000ASL User Manual

PLAYBACK > Basic operations
PLAYBACK
Basic operations

Selecting the output speakers

Press the SP A/B key to select the output destination speaker.
AMP SLEEP SP A/B
PHONO LINE 1 LINE 2
TV CD USB DAC
OPT 1 OPT 2 COAX
TUNER BLUETOOTH NET
DISPLAY MEMORY PRESET
1 2 3
SETUP OPTION
ENTER
NOW PLAYING RETURN
VOLUME
MUTE
/
Each time it is pressed, it switches between the speakers in the order A, B, A+B, Off. You can check which
speakers are selected on the front display.
A: Outputs from the speakers connected to the A jacks.
(
B: Outputs from the speakers connected to B jacks.
(
A+B: Outputs from both the A and B jacks. Use this setting when connected with bi-wiring.
(
Off: No output from speakers connected to the A or B jacks.
(
NOTE
This operation can be done also with SPEAKERS on the front panel.
(
Regardless of the speaker selection, audio is always output to the PRE OUT jacks.
(
If the speakers are bi-wired, select A+B.
(
When headphones are connected, no audio is output from the speakers or PRE OUT jacks.
(
AMP AMP SLEEP SLEEP SP A/B
PHONO PHONO LINE 1 LINE 1 LINE 2 LINE 2
TV TV CD CD USB DAC USB DAC
OPT 1 OPT 1 OPT 2 OPT 2 COAX COAX
TUNER TUNER BLUETOOTH BLUETOOTH NET NET
50
SP A/B