Advertisement
Table of Contents
Quick Reference Guide
Accessories
The following accessories are supplied with this product.
Remote control
Simple remote
control
* The fi gure of the supplied power cable may differ depending upon regions.
Preparing the remote control
1
3
2 2
Items necessary for connection
Speakers
E.g.
Front speaker
• Use speakers with an impedance of at least 6 Ω. 4 Ω speakers can also be used as the front speakers. For more information on speaker
impedance, refer to page 3.
• If you are using a CRT monitor, we recommend that you use magnetically shielded speakers.
• Prepare at least two front speakers. The priority of the other speakers is as follows:
1
Two surround speakers
2
One center speaker
3
One (or two) surround back speaker (s)/presence speakers
External components
TV
Batteries (4)
AM loop antenna
(AAA, LR03, UM-4)
1
Take off the battery compartment cover.
2
Insert the four supplied AAA batteries
into the battery case, following the
polarity markings.
3
Snap the battery compartment cover
back into place.
E.g.
Center speaker
Playback device such as
BD (Blu-ray Disc)/DVD players
Indoor FM antenna
YPAO microphone
Be sure to aim the remote control directly at the remote
control sensor on this unit during operation.
within 20 feet (6 m)
E.g.
Surround speaker, surround back
speaker, and presence speaker
Cable
• Cables for connecting external components
(may differ depending on the components you are connecting)
• Speaker cables
(a quantity to match the number of speakers you are connecting)
• Audio pin cable
(for subwoofer)
- 1 -
English
for U.S.A.
Microphone base
Power cable
E.g.
Active subwoofer
Advertisement
Table of Contents
Related Manuals for Yamaha RX-A3000
Summary of Contents for Yamaha RX-A3000
-
Page 1: Preparing The Remote Control
Active subwoofer speaker, and presence speaker • Use speakers with an impedance of at least 6 Ω. 4 Ω speakers can also be used as the front speakers. For more information on speaker impedance, refer to page 3. • If you are using a CRT monitor, we recommend that you use magnetically shielded speakers. -
Page 2: Connect A Tv
Connect and install as follows the fi rst time you use this unit. See the following explanations for the connections for each number. BD/DVD player (recorder) This unit Front speaker R Front speaker L Subwoofer Surround speaker R Center speaker... -
Page 3: Connect The Speakers
“CHECK SP WIRES!” will appear on the front panel display when this unit is switched on. • This unit is confi gured for 8 Ω speakers at the factory setting. When connecting 6 Ω speakers, confi gure the speaker... -
Page 4: Listening To Tv Audio
Converted Through Converted For more information on video signal conversion, refer to “Connecting a TV monitor” in the Owner’s Manual. Listening to TV audio To play back TV audio on this unit, connect the TV audio output to this unit. -
Page 5: Connect The Power Cable
Treble:0.0dB The several settings other than ones in the above table can be assigned to the SCENE keys. For more information on the SCENE function, refer to “Changing input settings with a single key (SCENE function)” in the Owner’s Manual. -
Page 6: Set Up The Speaker Parameters Automatically (Ypao)
• The amount of time for measurement varies from about two to ten minutes according to settings. • The test tone is output at high volume. Refrain from using this function at night when it may be a nuisance to others. - Page 7 When the display at right appears, the YPAO setup is complete. Press ENTER. YPAO is terminated. Disconnect the YPAO microphone. All the preparation is completed. Enjoy the various functions provided by this unit. For details on the operations, refer to the Owner’s Manual. - 7 -...
-
Page 8: Basic Operations
A . S e l : A u t o Selects a scene You can switch the settings such as input sources and sound fi eld programs with a single key. Refer to “Default scene settings” on page 5 for details on the settings assigned to this unit.