Backing Up/Recovering The Settings (Recov./Backup); Restoring The Default Settings (Initialize); Updating The Firmware (Firm Update); Checking The Firmware Version (Version) - Yamaha RX-A3020 Owner's Manual

Backing up/recovering the settings (RECOV./BACKUP)

SP IMP. - RECOV./BACKUP
DOCK
TAG
HD
STEREO TUNED PRE AMP PARTY MUTE
ZONE ZONE ZONE ADAPTIVE
BACKUP
2 3 4
IN OUT 1 OUT 2
ENHANCER SLEEP
HD 3
Creates backup of the settings of the unit, or recovers the settings from the backup.
■
Backup/recovery procedure
1
Press STRAIGHT repeatedly to select "BACKUP" or "RECOVERY" and press INFO
to start the process.
Choices
BACKUP Creates backup of the settings of the unit in the internal memory.
Recovers the settings of the unit from the backup (available only when
RECOVERY
backup has been created).
Note
• Do not turn off the unit during the recovery process. Otherwise, the settings may not be restored
correctly.
• The backup does not contain user information (such as user accounts and passwords).

Restoring the default settings (INITIALIZE)

DOCK SP IMP. - INITIALIZE
TAG
HD
MUTE
STEREO TUNED PRE AMP PARTY
ZONE ZONE ZONE ADAPTIVE
CANCEL
IN OUT 1 OUT 2 2 3 4
ENHANCER SLEEP
3
HD
Restores the default settings for the unit.
Choices
VIDEO Restores the default settings for video configurations.
ALL Restores the default settings for the unit.
CANCEL Does not perform an initialization.
VOLUME
DRC
PL L C R PR
SL SW1 SW SW2 SR
PL SBL SB SBR PR
VOLUME
DRC
PL L C R PR
SL SW1 SW SW2 SR
PL SBL SB SBR PR

Updating the firmware (FIRM UPDATE)

SP IMP. - FIRM UPDATE
DOCK
TAG
HD
STEREO TUNED PRE AMP PARTY
ZONE ZONE ZONE
2 3 4
IN OUT 1 OUT 2
ENHANCER SLEEP
HD 3
New firmware that provides additional features or product improvements will be
released as needed. Updates can be downloaded from our website. If the unit is
connected to the Internet, you can download the firmware via the network. For details,
refer to the information supplied with updates.
■
Firmware update procedure
Do not perform this procedure unless firmware update is necessary. Also, make sure
you read the information supplied with updates before updating the firmware.
1
Press STRAIGHT repeatedly to select "USB" or "NETWORK" and press INFO to
start firmware update.
Choices
USB Update the firmware using a USB memory device.
NETWORK Update the firmware via the network.
• If the unit detects newer firmware over the network, the corresponding message will be displayed after
ON SCREEN is pressed. In this case, you can also update the unit's firmware by following the procedure in
"Updating the unit's firmware" (p.144).

Checking the firmware version (VERSION)

DOCK SP IMP. - VERSION
TAG
HD
STEREO TUNED PRE AMP PARTY
ZONE ZONE ZONE
x.xx
IN OUT 1 OUT 2 2 3 4
ENHANCER SLEEP
3
HD
Check the version of firmware currently installed on the unit.
• You can also check the firmware version in "System" (p.132) in the "Information" menu.
• It may take a while until the firmware version is displayed.
CONFIGURATIONS ➤ Configuring the system settings (ADVANCED SETUP menu)
MUTE VOLUME
ADAPTIVE DRC
USB
PL L C R PR
SL SW1 SW SW2 SR
PL SBL SB SBR PR
MUTE VOLUME
ADAPTIVE DRC
PL L C R PR
SL SW1 SW SW2 SR
PL SBL SB SBR PR
135
En