Setup Menu Items - Yamaha RX-A3020 Owner's Manual

Setup menu items

Menu Item
Auto Setup
Setting Pattern
Setting Data Copy
Power Amp Assign
Speaker Configuration
Manual Setup
Distance
Level
Parametric EQ
Test Tone
Delay Enable
Lipsync Auto/Manual Select
Adjustment
Dynamic Range
Sound
Max Volume
Initial Volume
Pure Direct Mode
Adaptive DSP Level
Analog to Analog Conversion
Video
Video Mode
Function
Automatically optimizes the speaker settings (YPAO).
Registers two speaker setting patterns and switches between them.
Copies the "Setting Pattern" parameters in the specified direction.
Selects a speaker system.
Front Selects the size of the front speakers.
Center Selects whether or not a center speaker is connected and its size.
Surround Selects whether or not surround speakers are connected and their size.
Surround Back Selects whether or not surround back speakers are connected and their size.
Front Presence Selects whether or not front presence speakers are connected.
Rear Presence Selects whether or not rear presence speakers are connected.
Subwoofer 1
Selects whether or not a subwoofer is connected to the SUBWOOFER 1 or SUBWOOFER 2 jack and its phase.
Subwoofer 2
SWFR Layout Selects a subwoofer layout when 2 subwoofers are used.
Extra Bass Sets the speakers to produce the front channel low-frequency components.
Sets the distance between each speaker and listening position.
Adjusts the volume of each speaker.
Adjusts the tone with an equalizer.
Enables/disables the test tone output.
Enables/disables the Lipsync adjustment for each input source.
Selects the method to adjust the delay between video and audio output.
Adjusts the delay between video and audio output manually.
Selects the dynamic range adjustment method for bitstream audio (Dolby Digital and DTS signals) playback.
Sets the maximum volume to prevent excessive loudness.
Sets the initial volume for when this receiver is turned on.
Selects whether to output video signals during the Pure Direct mode.
Selects whether to automatically adjust the CINEMA DSP effect level.
Enables/disables the video conversion between the analog video jacks
Enables/disables the video signal processing (resolution, aspect ratio and video adjustments).
CONFIGURATIONS ➤ Configuring various functions (Setup menu)
Page
50
114
114
114
115
115
115
115
116
116
116
116
116
116
117
117
117
118
118
118
118
118
119
119
119
119
119
112
En