Editing Device Names - Yamaha RX-A3020 Owner's Manual

4
SOURCE SOURCE RECEIVER RECEIVER
RECEIVER z RECEIVER z
5
AV
1 2 3 4
5 6 7 V-AUX
AUDIO
Input selection keys
1 2 3 4
PHONO MULTI USB NET
TUNER [ A ] [ B ] [ C ]
SCENE
SCENE
1 2 3 4
VOLUME
PROGRAM MUTE
External device
TOP MENU POP-UP/MENU
operation keys
ON SCREEN OPTION
Menu operation keys
ENTER Cursor keys
6
ENTER
DISPLAY DISPLAY
RETURN DISPLAY
MODE MODE
External device
MODE
operation keys
LIVE
CLASSICAL ENTERTAIN
CLUB
PRESET
MOVIE STEREO STRAIGHT
TV
PURE
INPUT
DIRECT
TV VOL TV CH
TV operation keys
MUTE
TV z
7
SUR.
ENHANCER PARTY HDMI OUT
DECODE
INFO MEMORY FM AM
8
1 2 3
TUN./ CH TUN./ CH
4 5 6
Numeric keys
7 8 9 SLEEP
10 0 ENT LEVEL
SETUP
ZONE SETUP
Press ENTER.
Aim the infrared transmitters of the remote controls
at each other.
Remote control of external device
5 to 10 cm (2 to 4") apart
Perform the following steps (a and b) within
10 seconds.
a On the unit, press one of the following keys to which you want to
assign a function.
For playback device: SOURCE z, menu operations keys,
DISPLAY, MODE, external device operation keys, numeric keys
For TV: TV operation keys
b On the external device, press the key from which the operation is
learned until "OK" appears in the display window.
If "NG" appears, learning has failed. Repeat from Step 4.
Repeat Steps 3 to 6 until all desired operations are
learned.
To exit from the setup menu, press SETUP.
• This remote control can learn approximately 200 functions (may be
decreased depending on the signals). If "FULL" appears in the display
window, clear unnecessary assignments to free some memory space for the
new functions.
Note
• If you press RECEIVER z in Step 3, you can assign functions of an external
receiver to the menu operation keys, external device operation keys or
numeric keys. However, it makes these keys to control the unit impossible. If
you need to restore the remote control code for the unit, perform the following
steps.
a Press SETUP.
b Use the cursor keys (q/w) to select "CLEAR" and press ENTER.
c Use the cursor keys (q/w) to select "LEARN" and press ENTER.
d Press RECEIVER z.
e Hold down ENTER until "OK" appears on the window display.
f To exit from the setup menu, press SETUP.

Editing device names

You can edit the device names or scene names displayed on the
remote control's display window.
1
Press SETUP.
Perform each of the following steps within 30 seconds.
Otherwise, the setting will be canceled. If this happens,
repeat from Step 1.
2
Use the cursor keys (q/w) to select "RENAME" and
press ENTER.
RENAME
3
Press one of the following keys to select a device or
a scene.
For playback device: press the input selection key
(corresponding to the input jacks where the device is connected).
For TV: press TV z.
For AV receiver (the unit): press RECEIVER z.
For scene: press one of the SCENE keys.
CONFIGURATIONS ➤ Controlling external devices with the remote control
139
En