Fm/Am Radio - Yamaha RX-A3020 Owner's Manual

FM/AM radio

Problem
FM radio reception is weak or noisy.
AM radio reception is weak or noisy.
Radio stations cannot be selected automatically.
AM radio stations cannot be registered as
presets.
The unit does not receive HD Radio signals.
(U.S.A. model only)
Cause
There is multi-path interference.
Your area is too far from the FM station transmitter.
The noises may be caused by fluorescent lamps, motors,
thermostats, or other electrical equipment.
Your area is too far from the FM station transmitter.
The AM radio signal is weak.
Auto Preset has been used.
The unit is in the monaural reception mode.
Remedy
Adjust the FM antenna height or orientation, or place it in a different location.
(U.S.A. model only)
Set "Audio Mode" in the "Option" menu to "Mono" to select monaural FM radio
reception (p.102).
(Except for U.S.A. model)
Set "FM Mode" in the "Option" menu to "Mono" to select monaural FM radio
reception (p.102).
Use an outdoor FM antenna. We recommend using a sensitive multi-element
antenna.
It is difficult to completely eliminate noise. It may be reduced by using an outdoor
AM antenna.
Select the station manually (p.69).
Use an outdoor antenna. We recommend using a sensitive multi-element
antenna.
Adjust the AM antenna orientation.
Select the station manually (p.69).
Use an outdoor AM antenna. Connect it to the ANTENNA (AM) jack together with
the supplied AM antenna.
Auto Preset is for registering FM radio stations and HD Radio station (U.S.A.
model only) only. Register AM radio stations manually (p.70).
Set "Audio Mode" in the "Option" menu to "Auto" (p.102).
APPENDIX ➤ Troubleshooting
149
En