Checking The Measurement Results - Yamaha RX-A3020 Owner's Manual

1 2 3 4 5 6 7 8 9
Automatic speaker setup
SOURCE SOURCE RECEIVER RECEIVER
AV AV
1 1 2 2 3 3 4 4
5 5 6 6 7 7 V-AUX V-AUX
AUDIO AUDIO
1 1 2 2 3 3 4 4
PHONO PHONO MULTI MULTI L L USB USB NET NET
TUNER TUNER [ A ] [ A ] [ B ] [ B ] [ C ] [ C ]
SCENE
1 2 3 4
VOLUME
PROGRAM MUTE
TOP MENU POP-UP/MENU
ON SCREEN OPTION
Cursor keys
ENTER
ENTER
RETURN DISPLAY
MODE
LIVE
CLASSICAL ENTERTAIN
CLUB
PRESET
MOVIE STEREO STRAIGHT
TV
PURE
INPUT
DIRECT
TV VOL TV CH
MUTE
d In the same way, perform the angle measurement for the
positions "2" and "3".
The following screen appears on the TV when the third angle
measurement finishes.
5
Use the cursor keys to select "Save/Cancel" and
press ENTER.
• To check the measurement results, select "Result". For details, see
"Checking the measurement results" (p.56).
6
To save the measurement result, use the cursor
keys to select "SAVE" and press ENTER.
The adjusted speaker settings are applied.
• To finish the measurement without saving the result, select "CANCEL".
7
Disconnect the YPAO microphone from the unit.
This completes optimization of the speaker settings.
Caution
• The YPAO microphone is sensitive to heat, so should not be placed anywhere
where it could be exposed to direct sunlight or high temperatures (such as on
top of AV equipment).

Checking the measurement results

You can check the YPAO measurement results.
1
After the measurement, use the cursor keys to
select "Result" and press ENTER.
• You can also select "Result" from "Auto Setup" (p.112) in the "Setup" menu,
which displays the previous measurement results.
The following screen appears.
1
1
Measurement result items
2
Measurement result details
3
The number of measured positions (when multi
measure is performed)
PREPARATIONS ➤ Optimizing the speaker settings automatically (YPAO)
2
3
56
En