Information On Hdmi; Hdmi Control - Yamaha RX-A3020 Owner's Manual

Information on HDMI

HDMI Control

HDMI Control allows you to operate external devices via HDMI. If you connect a TV that
supports HDMI Control to the unit with an HDMI cable, you can control the unit (such as
power and volume) with TV remote control operations. You can also control playback
devices (such as HDMI Control-compatible BD/DVD players) connected to the unit with
an HDMI cable.
For details on connections, see "Connecting a TV" (p.35) and "Connecting video
devices (such as BD/DVD players)" (p.41).
Operations available from the TV's remote control
• Standby synchronization
• Volume control including mute
• Switching to input audio from the TV when the TV input is switched to its built-in tuner
• Switching to input video/audio from the selected playback device
• Switching between audio output devices (the unit or TV speaker)
(Example)
HDMI Control
Playback device The unit turns off
also turns off (standby)
Operations available from the unit's remote control
• Starting playback on the playback device and turning on the TV with a scene
selection (p.61)
• Switching the TV input to display the on-screen menu (when ON SCREEN is pressed)
• Controlling the playback device (playback and menu operations) without registering
remote control codes (p.137)
HDMI Control
Turn off the TV
(Example)
HDMI Control
Playback starts
Press SCENE (BD/DVD)
To use HDMI Control, you need to perform the following HDMI Control link setup after
connecting the TV and playback devices.
• This setup is required every time you add a new HDMI Control-compatible device to your system.
1
Turn on the unit, TV, and playback devices.
2
Enable HDMI Control on the unit, TV, and playback devices (such as
HDMI Control-compatible BD/DVD players).
To enable HDMI Control on the unit, set "HDMI Control" (p.122) in the "Setup"
menu to "On" and configure the related items ("TV Audio Input", "ARC", and
"Standby Sync").
3
Turn off the main power of the TV and then turn off the unit and
playback devices.
4
Turn on the unit and playback devices and then turn on the TV.
5
Switch the TV input to display the video from the unit.
6
Check the followings.
On the unit: The input to which the playback device is connected is selected.
If not, select the input source manually.
On the TV: The video from the playback device is displayed.
HDMI Control
Turns on and displays
video from the playback
device
APPENDIX ➤ Information on HDMI
158
En