Configuration
You can save your Audio changes by highlighting Save and pressing
Cancel exits the screen without saving the changes.
Alarm-Out Screen
Highlight Alarm-Out in the Devices menu and press
you to change the settings and establish a schedule for each alarm output from the
DVR.
Each alarm output can be given its own title by highlighting the box under the Title
heading and pressing
Highlighting the boxes under the Type heading allows you to set the alarm output for
NO or NC (normally open or normally closed).
Highlighting the box beside Dwell Time and pressing
time of the alarm output. Dwell times range from 5 seconds to 15 minutes.
Highlighting the Schedule tab causes the Schedule screen to display.
Rev 1.00
Note
The DVR will NOT record audio when the recording speed is set
to less than 1 ips.
Figure 3-41
Alarm-Out Settings Screen
. A virtual keyboard appears allowing you to enter the title.
49
. Selecting
. The Alarm-Out screen allows
allows you to set the dwell
Document 900.0856
12/06