Recording Video - Honeywell HRXD9 User Manual

Operation
Clicking Camera and selecting the camera number is the same as pressing the
individual camera buttons on the front panel which displays the selected camera full
screen. When in the PIP display mode, clicking the right mouse button and selecting
PIP changes the location and the size of the PIP.
Selecting PIP, 2x2, 3x3 and 4x4 display the cameras in the selected multi-view screen
mode.
Clicking Previous Group or Next Group is the same as pressing the Left or Right
buttons on the front panel which moves to the previous or next page.
Selecting Edit Group supports the active cameo function. Select Edit Group and
choose a camera that you want to change display position (for example, Camera A).
Then, click the right mouse button to display the menu. If you select another camera in
the menu (for example, Camera B), the screen displays Camera B instead of Camera
A. When in the 4x4 format, Camera A and Camera B will switch positions.

Recording Video

Once you have installed the DVR following the instructions in
is ready to record. The DVR will start recording based on the settings you made in the
Record setup screen. See
Recycle On or Recycle Off. The factory default is Recycle On. It does this by recording
over the oldest video once the hard disk is full. Setting the DVR to Recycle Off causes
it to stop recording once the hard disk is full.
Standard or High. The factory default resolution is Standard. When set to Standard,
the DVR has a maximum recording speed of 240 ips. When set to High, the DVR has a
maximum recording speed of 120 ips.
Pressing PANIC starts panic recording of all cameras, and pressing the button again
stops panic recording. If you set the Panic Recording Duration in the Record Screen,
panic recording will stop automatically according to the preset duration as long as
PANIC is not pressed.
Rev 1.00
Chapter 3,
Note When the DVR is in the search mode, the maximum recording
speed decreases by half. For example, in search mode, the
DVR's maximum recording speed decreases to 120 ips when set
to Standard resolution.
Configuration.
88
Chapter 2, Installation, it
Document 900.0856
12/06