Alarm-In Screen; Figure 3-55 Alarm-In Settings Screen; Figure 3-56 Alarm-In Actions 1 Screen - Honeywell HRXD9 User Manual

Configuration

Alarm-In Screen

Highlight Alarm-In in the Event menu and press
appears.
The alarm terminal strip on the back of the DVR has inputs associated with each alarm.
You can set up each input on the Alarm-In screen. You can turn each input On or Off
by highlighting the alarm number and pressing
Each input can be given a title. Highlight the desired Title box and press
keyboard appears allowing you to enter a title name.
Each input can be set as NO (normally open) or NC (normally closed).
Highlight the Actions 1 and Actions 2 tabs, and the Actions 1 and Actions 2 setup
screens appear.
You can set the actions the DVR will take whenever it senses an input on one of its alarm
input connectors.
Rev 1.00
Figure 3-55 Alarm-In Settings Screen
Figure 3-56 Alarm-In Actions 1 Screen
. The Alarm-In setup screen
.
61
. A virtual
Document 900.0856
12/06