Table of Contents
Advertisement
Operation
When in one of the multi-view formats, scrolling the mouse wheel up and down operates
the same as pressing DISPLAY by switching the screen format between PIP, 2x2, 3x3
and 4x4.
Clicking the right mouse button during live monitoring displays the following menu:
Selecting Freeze, PTZ... and Spot Monitor... is the same as pressing the FREEZE,
PTZ and SPOT buttons as described above in the
chapter.
Selecting Zoom... zooms in on the live image. While in the zoom mode, there are two
ways to move around the enlarged portion of the video. First, there is a PIP located in
the right-bottom corner. The PIP has a rectangle showing what area of the image has
been enlarged. Click inside the PIP to move to another area of the image you want
enlarged. Second, click and hold the mouse button on the enlarged video and drag the
video.
Selecting Toggle VGA is the same as pressing and holding DISPLAY for more than five
seconds. It switches the video out between Video Out (BNC or SVHS Out) and VGA Out.
During clip copy, you cannot switch the video output between Video Out and VGA Out.
Caution
Selecting Display shows the following menu:
Rev 1.00
Figure 4-8
Mouse Menu
The DVR will NOT record video for about 3 seconds while
switching the video output between Video Out and VGA Out.
Figure 4-9
Mouse Display Menu
Live Monitoring
87
section of this
Document 900.0856
12/06
Advertisement
Table of Contents
