Display Screen; Figure 3-42 Alarm-Out Schedule Screen - Honeywell HRXD9 User Manual

Configuration
You can add and edit alarm output schedules on this screen. Highlight the + and press
The Day box allows you to select the days that the alarm schedule will be active. The
choices are: Sun, Mon, Tue, Wed, Thu, Fri, Sat, M~F, Hol and All.
The Range box allows you to set the time that the alarm schedule will be active in
30-minute increments from 00:00 to 24:00.
The Mode box allows you to set how the alarm reacts during the scheduled time. When
set to On, the Alarm-Out is active during the scheduled time. When set to Event, the
Alarm-Out is only active when there is an Event during the scheduled time.
The Channels box allows you to set which alarm outputs will be active. You can also
select the DVR's internal buzzer.
The
whether or not you really wish to delete the schedule.
You can save your Alarm-Out changes by highlighting Save and pressing
Selecting Cancel exits the screen without saving the changes.

Display Screen

Highlight Display in the Devices menu and press
select what information will be displayed on the monitor.
Rev 1.00
Figure 3-42
to add a schedule. Highlighting the boxes under the Column heading and pressing
allows you to edit the information in those boxes.
box allows you to delete an alarm output schedule. You will be asked to confirm
Alarm-Out Schedule Screen
50
. The Display screen allows you to
Document 900.0856
.
12/06