Figure 3-53 Archive Setup Screen - Honeywell HRXD9 User Manual

Configuration
Highlight Archive On and press
Select the Days and Time Range you want archived.
You can accept the Archive Data Range by leaving the default checkmarks in the Last
Archived and Continue boxes. If you wish to enter specific times and dates in From
and To, toggle the checkmarks Off and then enter the time and date.
Highlight Recycle and press
and the storage device is full, the newest archived video data will overwrite the oldest
archived data. When Recycle is Off, the DVR will stop archiving video data until more
space is made available.
Highlight Summary Archive and press
Summary Archive is On, the DVR does not archive recorded video in full, but archives
1 or 2 ips from each channel. This will allow the DVR to archive more recorded video
and increase archive speed as well.
Rev 1.00
Figure 3-53 Archive Setup Screen
Note If you have not set up a storage device for archiving, a message
appears notifying you of this.
Note If 15 or less ips have been recorded per channel 1 ips will be
archived, and if 30 ips have been recorded per channel 2 ips will
be archived. If 16 to 29 ips have been recorded per channel, 1 or
2 ips will be archived depending on the number of key frames
recorded. The DVR will archive recorded video in full when 1 or
less ips has been recorded per channel.
to toggle between On and Off.
to toggle between On and Off. When Recycle is On
to toggle between On and Off. When
59 Document 900.0856
12/06